Homemade Hot Air Soldering Iron

It stops after a while.

Homemade hot air soldering iron. I have tried something similar with steel wool and a Radio Shack desoldering iron. However if you have an old soldering iron lying around you can make. Through this hole you will fix the iron.

However I would only very rarely use a soldering iron to remove a surface mount package with more than 2 pins. 45 Hot Air Pencil Link. However for bigger parts an embossing gun from the local hobby store about 20 does a great job.

Attach the air tubing to the TEE and the air pump. The stations total power consumption is about 1270W with a 500W Hot Air Gun 70W Soldering Iron and 700W Preheating technology. Modern soldering irons are purely resistive loads as incandescent lamps so you can safely use a cheap triac light dimmer to vary the temperature.

The two irons are coupled together using a. Looking for a good soldering iron. Let go with the tweezers.

Connect the handle turn on the power to turn on the power switch the display shows the factory set temperature value hot air gun 100C the largest air volume soldering station 200 C temperatureair volume setting. Holding the chip with tweezers first apply hot air from a few inches away and then move in to about 34 away from the chipMove the hot air in small circles. Using tweezers to apply gentle pressure against the device it quickly loosens up and falls off.

I have real hot air tools so maybe Im spoiled. This hot air soldering iron is not limited to SMT surface mount technology devices or super thin soldering wire. Its an issue of convenience for me.