How Often To Replace Soldering Iron Tip

Overheating the tip Your soldering iron should be set to 100C of the solders melting point.

How often to replace soldering iron tip. Often they are not interchangeable and you will want to purchase any new replacement tips from the manufacturer themselves. I understand the basics of good soldering from the EEV blog but I still have some questions. This step will coat the iron in a mixture of flux and solder.

The tip will be oxidized if you overheat it. Take your replacement soldering iron tip and fit it into the sleeve and slide it back on the heating element as it was before. Make sure to clean the tip after each joint wipe it on a wet sponger get excess solder off.

Your soldering iron expands and contracts when it heats and cools and an excessively tight locking nut can bind. Unplug it if you wont be using it for a while. Lastly youll slide the retaining nut over the tip and tip-retaining sleeve and tighten by hand.

But as long as the heating elements dont get broken and the tips stay shinny. Nonetheless the process of removing the tip and replacing it is generally the same. Tin the clean shiny copper surface with solder.

It is ideal for tinning the tip of your soldering iron on a regular basis even at rest or not in use. If you let the iron tip get to the highest heat without solder wetted onto its tip. As mentioned soldering iron tips are often not universal and the best way to ensure you are getting a soldering iron tip that fits your iron is to buy from your manufacturer.

If all else fails Soldering Iron tips do not last forever. Ultimate Soldering Starter Setup httpsamznto2LJHBIxHow to properly Tin a New or Re Tin an Old Soldering Iron Tiptinning soldering iron how to hel. If you do not tin the iron tip and let the solder touch it this way.