How To Change Soldering Tip

Tip the soldering iron downward and the loose tip should now fall out.

How to change soldering tip. Heat it up to around 350C and wait. Another thing that leads to shortened tip life is too high a tip temperature. Shape K Shaped like a knife Shape K is an extremely versatile tip.

Hold the solder to the tip while its heating up to make sure you tin the tip before it has a chance to turn black. Find the small screw on the soldering iron shaft near the tip and unscrew it by inserting the screwdriver and turn counter clockwise. The first thing of course is NOT to do this when the iron is hot.

I was reading guides and tips about the soldering process and Ive learn that you have to protect the tip from oxidation by tinning it. This should lead to a clean shiny tip ready for use for more info see this video. Hi Im a total beginner on soldering and stuff.

Offset Value Input Methods. Face and point and is commonly used for drag soldering and correction of bridging. Increase tip temperatures Leave the iron idling at high temperatures Leave the soldering iron on continuously without use Solder Use lower Tin Sn content solders if possible Use wire solder that has a milder flux core Be aware of solder composition and changes Flux.

I do see slight corrosion but its most likely the lead lead is the best for everything. You should tin the tip of your iron before and after each soldering session to extend its life. This step will coat the iron in a mixture of flux and solder.

Wipe the iron on a damp sponge to remove the excess. The solder melts and should stick at the tip. Im gonna explain what Ive learned and then please correct me if Im wrong.