How To Clean Motorcycle Exhaust Ports

You need a torch and a sandblaster A small 25 works great if you dont have a big one.

How to clean motorcycle exhaust ports. Next place the head pipes into position put a smear of antiseize on the studs or bolts and tighten the retaining collars just. And then theres that errant plastic bag that is floating around on the highway. Reversion is the exhaust being sucked back into the cylinder during the brief period when the valve is opened and the piston is on its way back down for the intake stroke.

Dans Motorcycle Power Valves. The exhaust port is heavily caked with gas smelling soot. Might be next time when I am washing my bike will use Cif on the silencer and update the result here.

Stand your cold motorcycle near the drain with a hosepipe connected and in close proximity. Though not on my motorcycle silencer but I used Cif to clean the induction motor of the kitchen chimney once. You try to dodge it safely and you seem to.

Peter Stevens Motorcycles Online is the best place to find motorcycle cleaning supplies in Australia. Step 1 - Apply Your Metal Cleaner. Take it to a well vented area with no flamable items around and clamp it in a vice.

Once through dry the exhaust header thoroughly with an unused cloth or rag. Over time sludge carbon deposits gum and varnish build up inside the engine and reduce the running efficiency. By making the port smaller the power.

Smooth the same sorts of casting. All the way back to the exhaust tip. I recommend always replacing the exhaust gaskets with a new full system.