How To Clean Solder Gun Tip

If your soldering tip becomes detinned oxidized it can be restored in a number of ways.

How to clean solder gun tip. Then immediately re-tin the tip with rosin core solder. When the solder is molten place the pumps tip against the solder you wish to remove. Knack for effective removal of solder using the desoldering wire.

Use a soldering iron to heat the solder you want to remove. Dont carry the solder to the joint on the iron. If the tip is very dirty you may want to dip the tip in a commercial tip cleaning paste and then wipe it clean on the damp soldering sponge.

You also can clean your soldering iron tip with a sponge while using it to keep it clean. Dedicated tip cleaning mesh is the best thing Ive found for that but the traditional damp sponge works fairly well. To begin use the propane torch to heat up the end of one of the flat head screwdrivers.

This comes in a little pot that you push the tip into. It doesnt matter too much if its ugly as long as you can get a nice shiny bit right at the tip. Try using a sewing pin with a plastic head even a correct size safety pin works and heat up the tip and the solder pad at the same time once the caps are removed.

Wipe away any excess solder on the damp sponge. This step should be performed as close as possible to the solder you intend to remove. Press down on the plunger or the bulb.

How can I remove melted plastic off my soldering iron. Metal wool effectively removes dirt and other contaminants and avoids issues associated with using a damp sponge to clean soldering tips. Brass wool is softer and less abrasive while the harder stainless steel wool has a longer life.