How To Clean The Soldering Iron Tip
This should lead to a clean shiny tip ready for use for more info see this video.
How to clean the soldering iron tip. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use. Wipe OFF the solder on the Cleaning Sponge or Copper Wool. Clean the tip After every cycle and before you start to solder always clean your tip.
Repeat the Process 3-4 Times until the Soldering Tips start Shining. Sal ammoniac for cleaning your stained glass soldering iron tip comes in a solid block form similar to that of a bar of soap. Soldering iron only works if there is a temperature difference.
This should lead to a clean shiny tip ready for use. Apart from removing the flux off it is essential to clean off surplus solder. This step will coat the iron in a mixture of flux and solder.
Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. How to Clean Soldering Iron Tip. Take either a wet sponge or wire wool.
You can also use stainless steel pot scrubber as long as it is dry to prevent transmitting the heat. The best tip tinner is your solder--tips should always be coated with a small amount of solder. How to Tin or Re-Tin Soldering Iron Tip.
Melt some good quality of solder wire on the Tip. Leave it there until the paste melts around the tip. Then dip the tip in the cleaner and do a slight twist action.