How To Make Your Own Soldering Tip

If everything checks out you should be ready for some soldering.

How to make your own soldering tip. A pointed tip is for small joints a larger tip is for big joints and Chisel tips are used for drag soldering to remove excess solder as well as unbridging excess solder on ic chips. The thread for my screwy-style tip is metric 4mm-by-075 and this is the same thread as RadioShack tm part 64-2073. Add 1mm to 3mm of solder pull the solder away keep the tip on the pad and lead for 1 more second and pull the tip away and it should then be totally fine.

Wait for few seconds and take back both your hands. Plug in the soldering iron and let it heat up. Dont handle bare wire with dirty hands.

A unit like this will not be suitable for soldering really large pieces like 120 scale brass locomotive cabs or boilers however. So here we are listing our own soldering techniques for readers convenience. Take solder material in one hand and the soldering iron in another and connect both of them targeting the lead of component from two opposite sides.

How to make your own motorcycle cables. I use this type of solder extensively for my sculpture work. Clean and tin the tip of the iron with a dab of solder lay the center conductor on the pad of solder in the solder cup and press the tip into the wire and cup.

Insert the tinned ground connector into the hole and apply the soldering iron to the conductor wire. Before going to soldering process it is very important to follow some tips and techniques to get best output. Hold the power cord jack wire tips over the exposed tips of the wires.

This tutorial will show you how to make a general silver solder with a low melting point easy. This free jewelry tutorial follows the same format as in the paid for pdf jewelry tutorials. This process will help improve the heat transfer from the iron to the item youre soldering.