How To Prepare A New Soldering Iron Tip
This process will help improve the heat transfer from the iron to the item youre soldering.
How to prepare a new soldering iron tip. This step will coat the iron in a mixture of flux and solder. Clear a work area then grab your soldering iron a solder sponge and water. Select a soldering iron tip to match the width of the pad.
Pay careful attention to the temperature of the iron. There are mainly 2 Components inside soldering iron. If not wait a bit more or add more water to the sponge if its too dry.
Before you can start soldering you need to prep your soldering iron by tinning the tip with solder. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use. When the iron is fresh it is solder coated probably by first coating the tip with high temperature silver solder.
Make sure they are really tight as that is where the connection happens. Begin by making sure the tip is attached to the iron and screwed tightly in place. Place braid over the pad and rest the iron tip on the.
Operating at temperatures exceeding 850F dramatically increases the formation of iron oxides which. One is a Heating Element and another is a Temperature adjustment control. When a soldering iron is hot but under 650 degrees Fahrenheit run the tip through the tin of the tinner.
Make sure you clean and tin the tip of the soldering iron to make the most of it. Tinning will also help to protect the tip and reduce wear. To prevent this you use solder to protect it.