How To Properly Solder Electrical Wires

Touch the tip of the solder to the tip of the soldering iron to create a small pool of liquid solder on the irons tip.

How to properly solder electrical wires. Then move the solder along the bare wire. This process should melt the solder and coat both wires evenly. When the Solder is melted it will automatically create a strong bond between the connector and wire.

You crimp it with the correct tooling then apply solder to the very end of the wire and let some flow into the B or butt cheek part of the terminal. Do not over tin the wire or solder may flow up under the wires insulation causing it become rigid or you will end up with globs of solder on the terminal that will have to be removed. Now that your wire has been properly tinned it can be soldered to the sensor the same way as the connector below.

But even in the soldering community theres still room to argue. Soldering tools for electrical applications should be in the 25-30 W range. This will help conduct heat to the wire.

Preload the Soldering Iron Tip with Solder Wire. Soldering is the best bet for an enduring repair so knowing how to solder wires correctly can be a worthy skill to learn. A piece of coax braid is good for burnishing the wire.

This article will show you the proper way on how to solder wires together. Once the connection evenly turns the correct silver color of solder remove the soldering iron and allow the joint to cool. Apply Solder to the Wire.

Start with clean bright copper. And then hold the soldering iron for 3-5 sec unless the Solder is melted. In this video I show you the tools tips tricks and techniques to properly solder from what type of solder and flux you sho.