How To Properly Solder Wires Together

Let it take some time.

How to properly solder wires together. As the solder melts it will flow into the fitting. While there are probably a thousand different ways to do this there are. Preload the Soldering Iron Tip with Solder Wire.

The second joint will likely go quicker than the first one. When done properly you have a strong conductive connection that turns two separate wires into one. Keep the iron in place and touch the solder to the wire until its fully coated.

If the wire is stranded twist the strands together with your fingers. Add the proper amount of solder into the connection. Apply Solder Flux to the Wire Joint.

And then hold the soldering iron for 3-5 sec unless the Solder is melted. You interweave the threads of the wires together before soldering the joint solid. Be able to solder most small electronic components and small circuits together yourself.

You should cover all of the wires with solder. They should be propped up off the workspace so you can have access to the area under the wires. Dont be in a rush.

Allow 12 to 34 inches of solder to flow into the joint. Solder the Wire Joint. Move the iron to the opposite bottom side of the connection and repeat the same technique.