How To Remove Rubber From Exhaust Pipe

While still hot take a slightly damp rag and wipe off as much of the rubber as possible.

How to remove rubber from exhaust pipe. If you are removing more than one hanger you might want to put a jack stand under the exhaust system to keep. Use a dry rag to remove any dirt from inside the tip of the exhaust. Try to remove the rubber from the pipe as quickly as possible.

And spray on the rubber. Thus we are done with removing the exhaust hanger in some simple steps. I recommend using gloves as you scrub as the steel can really get under your skin.

The other option is to let your bike run long enough to heat up the pipes again which may soften up melt the material enough for it to be removed. I noticed a small less than a dime sized spot on my pipe by the passenger peg last night when I was polishing before winter storage. It is the easiest way to remove exhaust hangers.

Ride around to heat up the pipes. Comes off like magic. Then hit the pipe around the joint at the 12 6 3 and 9 oclock positions.

Displace the hanger accordingly and pull the pipe out of it. Ive heard that Easy-Off oven cleaner works for thisjust make sure you do it outsidewhen I had a plastic bag fall and hit my pipes I took a short ride then used a damp cloth to clean off the residue. You actually start your bike to get the pipes hot and use a rag with the product applied to it to rub out the markings.

It will shrink the hanger and make room for the exhaust pipe to go out. Wait a bit and wipe the junk off with a rag. Removing plastic or rubber from chrome exhaust pipes Harley Davidson - YouTube.