How To Solder 3 Wires Together

Place the soldering iron underneath the wires and apply the solder from the top.

How to solder 3 wires together. Step 5 - Place the Connector Over the Ends of the Wires. The process for soldering 3 wires together is the same as splicing 2 4 or even 10 of them. There are three common techniques to solder wires together.

After a moment or two touch the other end of the connection with the solder continue to hold the soldering iron against the wire. Cover With Heat Shrink. First you need to strip the wires then add your heat shrink tubing physically connect the wiressolder the wires together and then shrink that heat shrink tubing to make a waterproof connection.

This process should melt the solder and coat both wires. 1 clean the wires so they shine 2 twist the wires tightly together and steady the connection with clamps and 3 heat one end of the connection with the tip of the soldering iron. The first step is you need to strip your wires.

You interweave the threads of the wires together before soldering the joint solid. Step 1 - Turn Off the Power. In this example I have one 16AWG wire feeding five 16AWG outputs for power distribution.

It is as easy as 1-2-3. The challenge is holding the wires in place long enough for the solder to cure. Twist and fold 2.

Carry on with the other wire in the same manner. Keep the iron in place and continue to touch the wire with the solder until it is completely coated. Step 2 - Choose the Right Size Wire Connector.