How To Solder Electrical Wires To Metal
The solder on both ends will melt.
How to solder electrical wires to metal. Place the iron tip onto the joint and when the joint is fully heated apply the solder just above the tip of the soldering iron. Continue melting the solder until theres a thin layer of solder covering all of the exposed wire. To do this heat up the soldering iron and touch the solder to the tip of the iron so that you cover the tip in a thin layer of solder.
Solder wire melted on to wires bonding them together. Prepare your object for soldering commander. Clean the area to be soldered scraping the wire down to bare metal and then wiping it clean with alcohol or acetone.
This process should melt the solder and coat both wires evenly. Solder the Object to the Large Piece of Metal. A third hand is useful for this.
Remove the iron and hold wires. This will prevent further oxide from forming and draw the solder along the length of the join. You need to apply the heat to the metal part on the plug because that takes the longest to heat and melt the solder.
Heat the end of one wire and coat it with solder. The core can be soldered in the same way. Touch the tip of the soldering iron to the wires and keep it there.
Repeat this process on the other wire. Once tinned tin the tip on your soldering iron leave a. HOW TO SOLDER - YouTube.