How To Solder Small Wires Together
The first step is you need to strip your wires.
How to solder small wires together. Hold it on the wire for 3-4 seconds. Tin the soldering gun ie melt a little solder on it. Use rosin core solder.
If the wire is stranded twist the strands together with your fingers. The wires are so small that the solder doesnt really stick so what you have to do is as quickly as possible melt the solder onto the iron but with the joint DIRECTLY in the middle of the two. 2 Heat the joint with a soldering iron or pencil from underneath.
Lock and Firmly Twist the Stripped Wires Together. Heat the copper and apply solder to the side opposite the heating implement. Soldering by Heating the Wires Directly.
In the case of stranded wire always keep the individual strands together after stripping the insulation by firmly twisting them together or better still applying a little solder. The most secure and durable way to splice two wires together is to solder them. Apply a small amount of solder flux.
Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires. Be able to solder most small electronic components and small circuits together yourself. 3 Heat the shrink tube to make it shrink down around the wire.
Simply tin both wires with suitable flux being used then lay them with the bare ends side by side and touch the hot iron to the pair. For the way we RCers use small wire there is no need to twist or mechanically bind the wires together before soldering them. How to Solder Two Small Wires - YouTube.