How To Solder Trailer Wires Together
Getting Rich Is Easy START DOING THIS TODAY.
How to solder trailer wires together. A stand with alligator clips can be homemade or purchased to hold the wires. Then use a pair of pliers to push the metal tap down into both wires flush with the body of the connector and snap the cover over the tap. Lock and Firmly Twist the Stripped Wires Together.
This tool worked the best for me in the automotive application and make it a breeze get that tuff to reach wires repaired soldered and sealed properly. How to Solder Wires Together Best tips and tricks Learn How to Solder Correctly. Use a wire jacket or something else around the wires.
Crimping will work well as Cougar suggested but if you really want the splice to be waterproof and permanent solder the wires then put heat-shrink tubing over the splice. He prepares the wire ends by removing a quarter-inch of the shielding then twists the strands of wire together. Connect each wire securely and button them all up well.
With the wires you want to join twisted together and held in place pick up your soldering iron in one hand and your solder in the other. How To Solder Wires Like A Pro. Then apply heat making sure you keep rotating the wires so it doesnt get too hot too fast in one spot.
Touch the tip of the soldering iron to the wires and keep it there. Also make sure that the flux bubbles but not burn. -Take each single copper wire apart from each others-Put the wire 10-20 minutes in salt acid 30 which can be bought from local hardware store cheap-Use protection glasses-Use toilet paper or something and clean the rest of the salt acid away you will also see alot of dirt coming off get it all off.
Using a Wire Stripper Strip the Wires to Desired Length. However if you install a new wire the box must be. A few tips and tricks to use when soldering is to first always make sure you do not have a cold solder joint make sure you are using the right solder for the job and always make sure you seal your solder joint from all types of weather.