How To Solder Two Small Wires Together

Then add some solder until the wire is soaked with solder.

How to solder two small wires together. The wires are so small that the solder doesnt really stick so what you have to do is as quickly as possible melt the solder onto the iron but with the joint DIRECTLY in the middle of the two. Tin the soldering gun ie melt a little solder on it. There are three main ways to solder wires together.

To be honest this is the way that. You should cover all of the wires with solder but still be able to see the strands when finished. Another approach that sometimes works is to first use a few turns of much finer wire to hold the two main wires together the whole blob then being soldered.

Solder is a metal alloy with a low melting temperature point used alongside a soldering iron to permanently join together two metals with a higher melting point. Note that the wire will get hot so you should consider holding it with some tweezers or similar. This process should melt the solder and coat both wires evenly.

Why is solder used for joining electrical wires. Touch the tip of the soldering iron to the copper wires. If possible you should twist the wires in-line before soldering as this makes a stronger and neater join than twisting the ends together.

Make seven or eight turns and cut the excess of the wire. Let the solder melt and flow over the wires. Add a comment.

Use rosin core solder. They should be propped up off the workspace so you can have access to the area under the wires. You may want to wear gloves too I chose not to.