How To Solder Wires Correctly

If you want to join two wires with solder the first thing you should do is to tin the two wires.

How to solder wires correctly. Solder the Wire Joint. Then we collect a little solder with a soldering iron and drive it along the wire. Tin the wires by applying a small amount of solder to the ends of each wire to just barely cover the wire.

Note that the wire will get hot so you should consider holding it with some tweezers or similar. Preload the Soldering Iron Tip with Solder Wire. Capillary action plays an important role in distributing the solder throughout the splice.

Using a Wire Stripper Strip the Wires to Desired Length. Using the soldering gun heat the wiring up enough to melt the solder and gently apply the soldering to the wire with the soldering gun touching the wire. Hold the two tinned wires on top of each other and touch the soldering iron to both wiresHow to solder wires together correctly like a proIf you want to join two wires with solder the first thing you should do is to tin the two wires.

Use heat shrink to cover the connection. You may select the dipping time as per your litz wire AWG size as below table. Also numerous good and bad joint pics.

Making a soldering litz wire is of as following. Repeat this process on the other wire. The wires will begin to heat up.

Twist them or arrange the overlapping soldering process. Make sure to heat it before because of that the Solder melts and joints with the connector. Always place the soldering iron or gun UNDER the wires and add the solder to the TOP of the wire.