How To.clean Old Brass

Use a second cloth dipped in clean water to remove any remaining soap then dry the brass.

How to.clean old brass. And not the citrus environmentally friendly stripper either. One way to remove tarnishing is to use abrasives like sand paper or polishing creams. Simply rub a thin coat onto the brass let sit for an hour or so and then clean the piece with hot soapy water.

This can be seen on old. This coating is properly referred to as lacquer cause thats what it is unfortunately in my experience the only thing that will reliably remove it is stripper. You can use your own concoction of soap and water or purchase premade cleaning packets like our Instaclean Brass Cleaning Packs that make it easy to clean in loads of 500.

The small pins get into the brass cases and even inside the primer pockets to get every inch of brass nice and clean. Never submerge the item unless its the only way to clean. A shop rag is perfect for working the chemical solvent into the lacquer.

Allow it to sit for a few minutes before rinsing with cold water. Wipe the surface clean wipe with a clean cloth and. Cleaning Brass Properly Soak the item in warm soapy water for several minutes then gently scrub with a soft toothbrush to remove dirt.

Simply dip the brush into the WD40 Spray and start to wipe the brass like you are painting a picture and the wd40 will lift the dirt and re-hydrates the old brass that has dried out over the years. Any such mechanical polishing removes some of the metal every time you do it. To clean brass dip a soft cotton cloth into a mixture of mild dish detergent and lukewarm water.

Rubbing alcohol and a white scrubbing sponge remove scuff marks. Proper cleaning is critical though because if you fail. After youve applied the WD40 let it soak into the brass and wiping away the excess after 30 minutes.