Proper Way To Solder Two Wires Together

Heat the copper and apply solder to the side opposite the heating implement.

Proper way to solder two wires together. Add a comment. When soldering wires with a big diameter it is not easy to bend or twist them. There is one way to twist wires together for soldering- a horizontal twist that yields a continues length of.

Soldering Wires Together One of the first things I learned to do when I was being trained to solder was the proper way to tin and prepare wire for soldering. The solder should be fed into the cool side away from the heat which allows it to be drawn in smoothly by the heat transfer through the wires. Ad Find China Manufacturers Of Solder Two Wires.

Solder is a metal alloy with a low melting temperature point used alongside a soldering iron to permanently join together two metals with a higher melting point. Let the solder melt and flow over the wires. Place the heat shrink over the wire and keep it away from the area to be soldered.

Use solder with a flux core. To keep strain off the low voltage wiring connections you can zip tie the two wire cables together over the cable jacket a couple of inches from the end of the jackets. Plug the soldering guniron into an electrical outlet and allow it to heat up for about three to five minutes.

Lay them together overlapping at the soldered part then blob them together. This video starts by showing the simplest technique for twisting two wires together which commences by baring the ends and overlaying them at 90 to each other as shown below. The most secure and durable way to splice two wires together is to solder them.

Some say its better to joint the two wires using a Y-splice while some only swear by the good ol rat tail splice. Use heat shrink to cover the connection. The AlumiConn TM connector shown here is used to splice a copper pigtail wire together with one or two aluminum wires as a step in reducing the fire hazard associated with aluminum electrical wiring.