How Do You Make A Soldering Iron Tip

If applied evenly this will keep the irons heat flow in check when it is next used in addition to preventing rust accumulation.

How do you make a soldering iron tip. Generally beginners make a common mistake to choose a tiny soldering tip. Wipe the iron on a damp sponge to remove the excess. Wipe the iron on a damp sponge to remove the excess.

Press the blob of solder into the metal to be soldered. Tinning will also help to protect the tip and reduce wear. When doing this slowly coil the wire until it achieves your desired diameter or area and having a measuring gadget would be ideal to confirm the requirements are as required.

When using the iron keep a little solder on the tip when the iron is in the stand. The solder melts and should stick at the tip. Then dip into the tin of tinner cleaner with a slight twisting action.

If the iron doesnt have replaceable tips get rid of it. If it doesnt you need to remove all solder and grind the. As you do this make sure the designed shape fits the space of the soldering iron perfectly.

Make sure your soldering iron is unplugged and let it cool down all the way. This sponge is used to clean solder off the tip of the soldering iron. The third tool is needed once you combine the solder iron and the soldering wire Im talking about the brass wire since the burning flux leaves dark marks on the soldering spot and on the tip of the soldering iron.

This is a very simple process and like tinning a soldering iron tip it only takes a very short time to get done. This step will coat the iron in a mixture of flux and solder. Apply a small amount of fresh solder to the iron tip.