How To Change Soldering Iron Tips
How to Change a Soldering Iron Tip - YouTube.
How to change soldering iron tips. Take your replacement soldering iron tip and fit it into the sleeve and slide it back on the heating element as it was before. Clean the tinned tip and you have a refurbished soldering tip. How to clean and re tin your soldering iron - YouTube.
If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the. Find the small screw on the soldering iron shaft near the tip and unscrew it by inserting the screwdriver and turn counter clockwise. Dont know if did any good.
I also have an Antex XS also 25W which is about 15 years old. Im gonna explain what Ive learned and then please correct me if Im wrong. Make sure to clean the tip after each joint wipe it on a wet sponger get excess solder off.
A regular soldering iron. The idea was that the silver solder would prolong the life of the tip. When I used the old cheapy soldering irons I would just tin them with regular solder and file smooth and re-tin as needed.
Lastly youll slide the retaining nut over the tip and tip-retaining sleeve and tighten by hand. The best tip tinner is your solder--tips should always be coated with a small amount of solder. If theres a stubborn piece of contaminant left on the tip you can use metal wool to gently scrape it off.
Install the prepared tip in your soldering iron. Tip the soldering iron downward and the loose tip should now fall out. Turn off and unplug your iron or base.