How To Maintain Solder Tip

Be careful not to over-tighten the locking nut.

How to maintain solder tip. Repeat the cleaning until the oxide is completely removed and then apply a new tin layer. Wipe the iron on a damp sponge to remove the excess. When performed properly they will not only ensure the longest possible working life for your soldering iron tips but they.

Using the proper type of flux will allow for optimal performance of your soldering iron tip and prevent the risk of oxidation which helps maintain the tip. Apply a bit of new solder so that all surfaces are coated. Fit the new tip into the retaining sleeve and screw it back to the heating element.

Keeping the tip of your soldering iron coated in a thin layer of solder and applying solder to a clean tip before shutting off your iron will help prevent oxidation from occurring since the solder itself is resistant to oxidative and corrosive effects. Operating at temperatures exceeding 850F dramatically increases the formation of iron oxides which is one of the major causes of detinning. Then dip into the tin of tinner cleaner with a slight twisting action.

This step will coat the iron in a mixture of flux and solder. To use the Tip tinnercleaner heat the soldering iron. One of the best preventive measures you can take to protect your solder tips is to use high-quality solder.

Maintenance and inspection of soldering pots -Case 2-SOLDERING POT. A soldering tip should be regularly cleaned and tinned and take an abrasive to it as needed to keep it smooth and free from pitting. To maintain the performance of any soldering iron tip a simple maintenance procedure is recommended.

Operate at the lowest possible temperature 800F 427C or lower. This will remove any oxides are in the tip. These actions are very important and quite simple to perform but are often neglected.