How Do You Solder Electrical Wires

I will show you how to solder wires together the right way to seal the solder joint with heat shrink is a must and you also need to make sure you do not have a cold solder joint.

How do you solder electrical wires. Damaged wiring can be soldered to complete or repair an automotive electrical circuit. Step 6 - Twist the Connector On. Put the leads through the board and bend them so that they stay dont fall out.

When doing splices clean the wires by scrapingbrushingsanding solder tin the wires to be joined slide clear heat shrink tubing over one wire lay the tinned ends together and touch them with the soldering iron and they will fuse nicely then slide the clear heat shrink tubing over the joint heat shrink one end pack it with petroleum jelly then heat shrink the other end. Your solder will be applied opposite from the iron on top of the wire. First you will have to strip off the insulator that covers the wires.

Step 1 - Turn Off the Power. How to Use Electrical Wire Connectors. When you are tinning the wires the resin will help the solder flow smoothly.

How do you solder electrical wire to metal. To do this heat up the soldering iron and touch the solder to the tip of the iron so that you cover the tip in a thin layer of solder. Use rosin core solder.

Solder is often a combination of mixed alloys. Crossing the Streams. This tool worked the best for me in the automotive application and make it a breeze get that tuff to reach wires repaired soldered and sealed.

If you want you can add soldering resin to the wire filaments. This will heat the wire to allow your solder to melt. Wipe the excess off with a damp paper towel or sponge.