How Do You Solder Small Wires

Use a pencilsoldering iron like the one in the same picture.

How do you solder small wires. Then touch the tip of the soldering iron to the bottom side of the wire so the solder pool is in contact with the wire. How to Use Electrical Wire Connectors. Soldering can also be used to create metal-work objects or forms of art.

The best thing is 14-gauge steel wire as it heats fast but retains heat fast enough to solder with. If you do need to use a littleadditional solder use the very thin kind about 2. Tiny wires sometimes only require a quick swipe across the joint to flow the tinned wires together.

When choosing you need to be aware of the lead content flux content melting point temperature and size. If you do it right you get a big melted bead ON the iron but with the wires running through the middle of it. Choosing the Right Solder Wire.

First place the solder on the tip to allow for melting. Run the solder over the entire splice so it can melt and travel into the gaps between the wires. Place soldering iron under the wire.

If youre using a new soldering iron you have to tin the tip. After you put the wire in a hole heat the junctionof the wire and hole until the solder on the wire and hole melt should take no more than 2 seconds. Touch the tip of the solder to the tip of the soldering iron to create a small pool of liquid solder on the irons tip.

Now heat both the conductor you are trying to solder and the pad you are trying to solder to. Very thin like a hair enamel coated wire works when using a reasonably small soldering tip. Step 6 - Twist the Connector On.