How To Clean A Soldering Iron Tip

Leave it there until the paste melts around the tip.

How to clean a soldering iron tip. Soldering iron only works if there is a temperature difference. This step will coat the iron in a mixture of flux and solder. Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged.

If the iron tip is heavily oxidized then you should clean it with a different technique. The best tip tinner is your solder--tips should always be coated with a small amount of solder. After every cycle and before you start to solder always clean your tip.

Use fluxes Spongeless and metal wool to remove small amounts of contaminants from your soldering iron tips during soldering circuit board or any other components. Then dip the tip in the cleaner and do a slight twist action. Melt some good quality of solder wire on the Tip.

This step will coat the iron in a mixture of flux and solder. To use the Tip tinnercleaner heat the soldering iron. Switch on the Soldering Station or the Iron and Make sure it is Hot Enough.

Now remove the tip and clean it with a moist sponge to remove the cleaner. This will remove oxidation from the iron tip and leave a thin layer of solder on the surface of the iron tip. This is done by first ensuring the tip is clean and free of surface oxides.

You will find that both a damp sponge and a wire cleaner will be effective for cleaning. Then dip into the tin of tinner cleaner with a slight twisting action. This should lead to a clean shiny tip ready for use.